Solidsteel audio furniture offers superior performance
and value.
Since their introduction in 1991, Solidsteel audio tables have
established a new level of technical and aesthetic refinement for
audio and video component support and isolation.
 |
| Model 5.4 in Silver Finish |
Solidsteel uses tubular steel frames in their tables, stands, and bases.
These tubular frames are reinforced by insterting a crimped steel bar
into the end of every tube. The final assembly of each table or stand
is done by hand, utilizing a brazing technique. This technique makes
use of a special brass solder with a high concentration of nickel alloy,
resulting in a weld with an exceptional strength-to-weight ratio. All
Solidsteel frames are finished with special anti-resonant paint.
All solidsteel racks and stands feature height-adjustable stainless
steel spikes to discharge spurious mechanical energy away from the
audio gear on the table or stand. These stainless steel spikes are
removable to allow the frame to be filled with sand, lead shot or other
similar types of damping materials. This provides further mass and
solidity to the stand.
To further reduce resonances from affecting sensitive audio
equipment, every shelf is supported on, and therefore isolated from,
the frame by three Duraluminium™ cones (or on polyurethane pads in
the case of the Series Three range) which are positioned to precisely
discharge unwanted energies away from the shelf and into the frame
and then away from the table or stand through the stainless steel
floor spikes.
Isolation through cones provides superb acoustic neutrality and also
offers a new degree of flexibility: for example, a user can fill the small
troughs into which the cones are inserted with silicone of different viscosities, thereby changing the overall acoustic response of the
table and the electronics it supports.
All shelves (except those of the Series Three range) are produced
from high-density MDF and have the considerable thickness of 19
millimeters/ 0.75 inch on the Series Five range and 30 millimeters/ 1.2
inches on the models Series Six range. The benefits of MDF include a
much higher damping factor and superior rigidity.
Osage Audio Products is happy to have been chosen as a retailer
for Solidsteel. This range of functional and attraction audio furniture
offers tremendous performance at a reasonable price.
For questions about any of these products or to place an order,
please call us at 573-696-3551 or email us. You can
also order through our Online Store.
Full specifications for the Solidsteel products and more
information can be found on the Solidsteel website.
We also have the full range of Solidsteel replacement parts available.
Please call or email us with your specific needs.
| |
|
|
|
| 3.4 |
$499.00 |
21.25 x 33.00 x 15.00 |
W- 18.33 (H- 9.38, 6.80, 6.80) D- 14.82 |
| |
|
|
|
| 3.5 |
$599.00 |
21.25 x 39.00 x 15.00 |
W- 18.33 (H- 6.80, 6.80, 6.80, 6.86) D- 14.82 |
| |
|
|
|
| 5.2 |
$499.00 |
22.44 x 19.01 x 18.11 |
W- 19.68 H- 12.00 D- 16.92 |
| |
|
|
|
| 5.3 |
$649.00 |
22.44 x 27.95 x 18.11 |
W- 19.68 (H- 9.44, 9.44) D- 16.92 |
| |
|
|
|
| 5.4 |
$799.00 |
22.44 x 35.74 x 18.11 |
W- 19.68 (H- 9.44, 7.51, 7.51) D- 16.92 |
| |
|
|
|
| 5.5 |
$949.00 |
22.44 x 42.12 x 18.11 |
W- 19.68 (H- 8.50, 6.33, 6.33, 7.51) D- 16.92 |
| |
|
|
|
| 6.2 |
$799.00 |
22.83 x 19.92 x 20.86 |
W- 19.68 H- 11.81 D- 19.68 |
| |
|
|
|
| 6.3 |
$999.00 |
22.83 x 30.23 x 20.86 |
W- 19.68 (H- 11.81, 7.87) D- 19.68 |
| |
|
|
|
| 6.4 |
$1,199.00 |
22.83 x 40.55 x 20.86 |
W- 19.68 (H- 11.81, 7.87, 7.87) D- 19.68 |
| |
|
|
|
| H-6 |
$1,299.00 |
42.12 x 26.77 x 19.29 |
W- 39.37 (H- 8.66, 8.66) D- 17.32 |
| |
|
|
|
| H-6 Partner |
$699.00 |
22.44 x 26.77 x 18.89 |
W- 19.68 (H- 8.66, 8.66) D- 16.92 |
| |
|
|
|
| Model A |
$399.00 |
19.29 x 5.90 x 23.60 |
W- 19.29 D- 23.60 |
| |
|
|
|
| Model B |
$349.00 |
18.50 x 5.90 x 15.74 |
W- 18.50 D- 15.74 |
| |
|
|
|
| HS-2 |
$1,799.00 |
25.40 x 21.30 x 22.10 |
W- 21.10 H- 12.00 D- 20.00 |
| |
|
|
|
| HS-3 |
$2,499.00 |
25.40 x 30.50 x 22.10 |
W- 21.10 (H- 12.00, 8.10) D- 20.00 |
| |
|
|
|
| HS-4 |
$2,999.00 |
25.40 x 39.80 x 22.10 |
W- 21.10 (H- 12.00, 8.10, 8.10) D- 20.00 |
| |
|
|
|
HS-A
Amp Stand |
$699.00 |
15.90 x 6.80 x 23.60 |
W- 15.90 D- 23.60 |
| |
|
|
|
HS-B
Amp Stand |
$675.00 |
15.90 x 6.90 x 18.90 |
W- 15.90 D- 18.90 |
Hyperspike Series Extension and Reconfiguration Accessories
Elevation and Extension kit parts are stainless steel. Elevation Kits are used to increase the
space between shelves on the Hyperspike Series audio racks. The Extension Kit is necessary to
add a shelf to an existing Hyperspike rack, in addition to the Elevation Kit.
135mm 5.30 inches (Vertical Pole) (Elevation Kit) $125.00
165mm 6.50 inches (Vertical Pole) (Elevation Kit) $200.00
205mm 8.00 inches (Vertical Pole) (Elevation Kit) $225.00
245mm 9.65 inches (Vertical Pole) (Elevation Kit) $275.00
305mm 12.00 inches (Vertical Pole) (Elevation Kit) $350.00
Extension Kit $360.00
Full specifications for the Solidsteel products and more
information can be found on the Solidsteel website.
|
