Vibrapod products are designed and manufactured in St. Louis, Missouri. 

Vibrapods have stood the test of time as a very affordable tool in isolating hi-fi components from unwanted vibrations and resonances.

The brainchildren of Sam Kennard, himself an expert in the science of plastics, Vibrapod isolators and cones have been on the market now for decades.  During that time they have received numerous industry awards for their effectiveness and high value.  The products simply work, and their cost is so low compared to other products on the market that it immediately catches the attention of people who are browsing hi-fi isolation products.

Vibrapod isolators and cones are made from a very specific formulation, identified by Mr. Kennard, that falls into the vinyl category.  This formulation dampens and dissipates energy from vibrations and resonances while also minimizing vertical and horizontal displacement.  The result is an elegant and inexpensive solution to a prevalent problem in hi-fi systems.

Some would say that adding Vibrapod products to a system is equivalent to an upgrade of components.  It’s possible that some people could have had results similar to that.  However, a more reasonable expectation is that in a system with no means of controlling vibration and resonances, Vibrapods are sure to yield a noticeable improvement.  And this improvement can be had for the cost of a nice dinner for two.

Please give us a call to discuss your particular situation and application.

Osage Audio Products is pleased to offer the Vibrapod product line.  These products offer excellent performance and reliability at a reasonable price.  If you have questions about Vibrapod isolators and cones and their application in your system, please call us at 573-696-3551 or email us at your convenience.  We are open late and weekends.

Vibrapod products are available for purchase by telephone, by email, in our showrooms, and also through our Online Store.

Please Note:  VIBRAPOD Isolators may leave rings on woods, acrylics, and painted surfaces. They may also dissolve the paint, especially if it is lacquer. To protect these surfaces it is suggested by The Vibrapod Company to use something such as a bar coaster, playing card, and simple piece of cardstock paper between the Vibrapod isolator or cone and these surfaces.

 

Vibrapod Isolators

Vibrapod Isolators can be used in a number of ways.  They can replace the existing feet on hi-fi components or they can be used as an isolator between the existing feet and the shelf.  They can be used to isolate loudspeakers from their stands.  They can also be used with either side up.

Vibrapods of varying load range ratings can be used for components whose weight distribution is not even in the various parts of the component.

Vibrapod Isolators are sold in sets of four.  Their dimensions are 9/16 inch tall by 2-7/16 inches in diameter.

Vibrapod
Model
Recommended Load In
Pounds For Each Vibrapod
Load Range In Pounds
For Each Vibrapod  
Model 1
2 1/2
2 – 3
Model 2
6
4 – 8
Model 3
10
8 – 12
Model 4
16
14 – 18
Model 5
25
22 – 28
     
Retail Price Per Set Of Four Isolators:  $25.00  

 

Vibrapod Cones

Vibrapod Cones offer an alternative to Vibrapod Isolators in instances where the use of a combination of materials offers a better and more complete solution.  They are composed of the same special vinyl compound as the Vibrapod Isolator, but in a sold cone shape with a stationary steel ball at the tip.  This ball can also be replaced by the user with a ball of the same size (7/16 inch in diameter) made of titanium or ceramic for fine tuning of their isolation properties.

Vibrapod Cones are priced each.  Their dimensions are 1.1 inches tall by 1-5/8 inches in diameter.  They can be used with Vibrapod Isolators in applications where the ball of the Vibrapod Cone is upward toward the component and the Vibrapod Isolator is between the opposite end of the Vibrapod Cone and the shelf.

Retail Price Each:  $8.00

 

Osage Audio Products is pleased to offer the Vibrapod product line.  These products offer excellent performance and reliability at a reasonable price.  If you have questions about Vibrapod isolators and cones and their application in your system, please call us at 573-696-3551 or email us at your convenience.  We are open late and weekends.

Vibrapod products are available for purchase by telephone, by email, in our showrooms, and also through our Online Store.


Osage Audio Products, LLC ∙ P.O. Box 232 ∙ Hallsville, MO  65255
  573-696-3551
www.osageaudio.com ∙ info@audiointelligent.com
2006-2021 All Rights Reserved.