Sound Anchors products are built in Palm Bay, Florida. 

Sound Anchors loudspeaker stands have been the benchmark of performance and American-made quality since 1984.

Bob Worzalla began building loudspeaker stands and platforms after realizing that an improvement in performance could be gained by putting many of the loudspeakers on the market on a rigid, high-mass base.  Even today, many of the loudspeaker stands on the market are flimsy and lightweight, and offer little benefit other than that of lifting a small monitor loudspeaker to a useable height. 

Sound Anchors loudspeaker stands feature a construction design that is superiorly rigid.  The materials that are chose are heavyweight square and rectangular steel tubing, 1/4 inch steel plate, and 1/2 inch steel bar. The heavyweight tubing of both the three post and four post models is filled with a proprietary sound deadening material at the factory.  The single post stand can be purchased pre-filled or the owner can fill it himself with sand or other material.

The result of all this is simply the best performing loudspeaker stand that money can buy, and at a price that is far below that of many of the other stands on the market today.  Add to that the fact that all Sound Anchors products are designed and built in the USA, and you have a product with value beyond compare.

If you own monitor loudspeakers of any brand, we invite you to give Sound Anchors a try.  We’re confident that you will immediately hear an improvement in the clarity and solidity of the sound that they produce.  If you are preparing to purchase a new pair of monitors, we encourage you to buy a pair of Sound Anchors loudspeaker stands to go with them.  There is nothing else that will go further toward maximizing their performance. 

NOTICE --  Along with the standard loudspeaker stands listed below, Sound Anchors can build for you stands that are exactly the height and have the exact size of top plate that you need for your speakers.  Amplifier stands, equipment racks, adjustable monitor stands, TV mounts, and floor standing loudspeaker bases are also available to fit a wide range of brands and models.  If you don’t see what you are looking for below, please email us or call us at 573-696-3551.

We at Osage Audio Products are proud to have been chosen as a retailer for this outstanding line of loudspeaker stand.  If you have questions about Sound Anchors products, please call us at 573-696-3551 or email us at your convenience.  We are open late and weekends.

Standard size Sound Anchors loudspeaker stands are available through our Online Store.  Please call us or email us if you need a non-standard size or if you are shopping for amplifier stands, equipment racks, or any of the other built-to-order Sound Anchors products.  Due to their design and construction, Sound Anchors products are extremely heavy and are assembled at the factory.  Because of this most of the products are classified as oversized and heavy for shipping purposes and the shipping costs reflect this.  Please check with us before you buy to confirm shipping costs for your order. 

All Sound Anchors products are normally built to order.  Please allow three to four weeks for delivery, and always check on current delivery lead times before you place your order.

 

Single Post
Loudspeaker Stand

Single Post Monitor Loudspeaker Stands
The Sound Anchors Single Post stand model is crafted from heavyweight steel tubing and features a 1/4 inch thick top plate with four Sound Anchors Blue Dot isolation pads on the top plate.  The standard top plate dimensions are 6.5 inches wide by 8 inches deep.  Standard heights are listed below.  Please contact us if you need a height or top plate size other than what is listed.  Practically any variation is possible, and many times at very little additional cost.

Sound Anchors Single Post stands are supplied with carpet spikes as standard.  If you have hardwood or tile floors, the Sound Anchors Conecoasters are suggested to protect your floor.

Sound Anchors Single Post stands are available factory-filled with a proprietary damping material for optimal performance.

Height   
 
Retail Price Per Pair
20 Inches
 
$320.00
24 Inches
 
$340.00
25 Inches   
 
$345.00
26 Inches 
 
$350.00
27 Inches 
 
$355.00
28 Inches   
 
$360.00

 

Three Post
Loudspeaker Stand

Three Post Monitor Loudspeaker Stands
The Sound Anchors Three Post Monitor Loudspeaker stand is the perfect choice when more mass and isolation are needed, and for medium-large to large sized speakers.  The frame of this model is constructed of heavyweight steel tubing that is filled at the factory with Sound Anchors’ proprietary damping material.  The speaker mounting area is manufactured from half-inch thick solid steel bar stock and the Sound Anchors Blue Dot isolation pads are applied as the speaker interface.

The Sound Anchors Three Post Monitor Stand has a standard top plate size of 7 inches wide by 9 inches deep.  Standard heights are listed below.  Please contact us if you need a height or top plate size other than what is listed.  Practically any variation is possible, and many times at very little additional cost.

Sound Anchors Three Post stands are supplied with carpet spikes as standard.  If you have hardwood or tile floors, the Sound Anchors Conecoasters are suggested to protect your floor.

Height   
  Retail Price Per Pair
12 Inches
 
$435.00
16 Inches
 
$470.00
20 Inches   
 
$505.00
24 Inches 
 
$540.00

 

Four Post
Loudspeaker Stand

Four Post Monitor Loudspeaker Stands
The Sound Anchors Three Post Monitor Loudspeaker stand is the ultimate choice when superior mass and isolation are needed for large and very large loudspeakers.  The frame of this model is constructed of heavyweight steel tubing that is filled at the factory with Sound Anchors’ proprietary damping material.  The speaker mounting area is manufactured from half-inch thick solid steel bar stock and the Sound Anchors Blue Dot isolation pads are applied as the speaker interface.  The Four Post model features a base with an extra large footprint for the exceptional stability.

The Sound Anchors Four Post Monitor Stand has a standard top plate size of 8 inches wide by 10 inches deep.  Standard heights are listed below.  Please contact us if you need a height or top plate size other than what is listed.  Practically any variation is possible, and many times at very little additional cost.

Sound Anchors Four Post stands are supplied with carpet spikes as standard.  If you have hardwood or tile floors, the Sound Anchors Conecoasters are suggested to protect your floor.

Height   
  Retail Price Per Pair
12 Inches
 
$570.00
16 Inches
 
$610.00
20 Inches   
 
$650.00
24 Inches 
 
$690.00

 

Conecoaster Floor Protectors

Conecoaster Floor Protectors
If your Sound Anchors loudspeaker stands, amplifier stands, or audio furniture is to be place on any flooring other than carpet, then you will need something to protect the flooring from the sharp points of the spikes provide with all Sound Anchors products.  The Sound Anchors Conecoasters do this job perfectly while also preserving the isolation properties of the spikes.  Priced each; order the quantity that you need for your application.

Retail Price:  $20.00 Each

 


Standard size Sound Anchors loudspeaker stands are available through our Online Store.  Please call us or email us if you need a non-standard size or if you are shopping for amplifier stands, equipment racks, or any of the other built-to-order Sound Anchors products.  Due to their design and construction, Sound Anchors products are extremely heavy and are assembled at the factory.  Because of this most of the products are classified as oversized and heavy for shipping purposes and the shipping costs reflect this.  Please check with us before you buy to confirm shipping costs for your order.

All Sound Anchors products are normally built to order.  Please allow three to four weeks for delivery, and always check on current delivery lead times before you place your order.



Osage Audio Products, LLC ∙ P.O. Box 232 ∙ Hallsville, MO  65255
  573-696-3551
www.osageaudio.com ∙ info@audiointelligent.com
2007-2017 All Rights Reserved.