The Quad Elite Series applies Quad’s culmination
of knowledge of solid state and software-based
electronics to create a truly high-performance and
high-value product line.
 |
|
Quad Elite Series |
The Elite CDS features the reliable Sony KM-313AAM transport mechanism and a Crystal DAC and has 24 bit/ 96 kHz resolution. Also featured are TosLink and SPDIF digital outputs.
| Specifications |
|
| |
|
|
| |
Frequency Response- |
20 Hz – 20 kHz (+0 dB/ -0.7 dB) |
| |
|
|
| |
Line Output Level- |
2.4 volts RCA/ 4.8 volts Quadlink |
| |
|
|
| |
Signal to Noise Ratio- |
>116 dB at 24 bit resolution, “A” Weighted |
| |
|
|
| |
Crosstalk- |
<-120 dB at 1 kHz |
| |
|
|
| Retail Price: $1199.00 |
|
The Elite CDP features the same drive unit as the CDS and offers 24 bit/ 192 kHz resolution. The Elite CDP adds the useful features of variable volume output from the RCA out jacks as well as 3 SPDIF inputs on RCA jacks and 3 TosLink inputs along with one each SPDIF and TosLink digital outputs.
| Specifications |
|
| |
|
|
| |
Frequency Response- |
20 Hz – 20 kHz (+0 dB/ -0.7 dB) |
| |
|
|
| |
Line Output Level- |
2.4 volts RCA/ 4.8 volts Quadlink |
| |
|
|
| |
Signal to Noise Ratio- |
>116 dB at 24 bit resolution, “A” Weighted |
| |
|
|
| |
Crosstalk- |
<-120 dB at 1 kHz |
| |
|
|
| Retail Price: $1799.00 |
|
Designed to work exclusively with the Elite Preamplifier, the Elite FM Tuner offers exceptional performance and ease of use at an affordable price.
| Specifications |
|
| |
|
|
| |
Tuning Range- |
88 MHz – 108 MHz |
| |
|
|
| |
Sensitivity- |
Mono: 18 bDuV |
| |
|
Stereo: 18 dBuV |
| |
|
|
| |
IF Rejection- |
>100 dB |
| |
|
|
| |
Pilot Tone Supression- |
>60 dB |
| |
|
|
| |
Antenna Input- |
2 x 75 Ohms Unbalanced |
| |
|
|
| Retail Price: $1099.00 |
|
The Elite Preamplifier features 3 line level RCA inputs, plus one record loop and one high quality phono section input, which is switchable between moving magnet and moving coil settings. The Elite Preamplifier comes complete with a 43 key remote control and is the perfect control center for any high performance music system.
| Specifications |
|
| |
|
|
| |
Frequency Response- |
|
| |
Line Inputs- |
0.1 Hz – 70 kHz (+/- 3 dB) |
| |
Phono Section Inputs- |
20 Hz – 20 kHz (+/- 0.5 dB) |
| |
|
|
| |
Phono Section: |
|
| |
Signal To Noise Ratio- |
78 dB (“A” Weighted, Ref. 775 uV) |
| |
Sensitivity- |
MM: 1 mV, 3 mV, 7.75 mV |
| |
|
MC: 100 uV, 300 uV, 775 uV |
| |
Total Harmonic Distortion- |
MM: <0.05% |
| |
|
MC: <0.01% |
| |
|
|
| |
Output Level- |
RCA: 775 mV (3.3 V maximum) |
| |
|
AMPBUS: 2 V (8 V maximum) |
| |
|
|
| |
Output Impedance- |
RCA: 100 Ohms |
| |
|
AMPBUS: 20 Ohms |
| |
|
|
| |
Tape Output Impedance- |
330 Ohms |
| |
|
|
| Retail Price: $1299.00 |
|
The Elite Series Stereo Amplifier features both RCA and Quad AMPBUS inputs and offers a maximum output of 90 watts into 8 Ohms and 120 Watts into 4 Ohms. Hi quality 5-way binding posts are supplied to accommodate any speaker cable termination.
| Specifications |
|
| |
|
|
| |
Frequency Response- |
0.2 Hz – 75 kHz (+/- 3 dB) |
| |
|
|
| |
Total Harmonic Distortion- |
<0.005% at 70 W, 1 kHz |
| |
|
|
| |
Signal To Noise Ratio- |
<-110 dB (20 Hz – 20 kHz) |
| |
|
|
| |
Input Sensitivity- |
RCA: 775 mV |
| |
|
AMPBUS: 2.0 V |
| |
|
|
| |
Input Impedance- |
RCA: 33k Ohms |
| |
|
AMPBUS: 10K Ohms |
| Retail Price: $1149.00 |
|
The Elite Series Mono Amplifier offers 150 watts of power into 8 Ohms and 220 watts into 4 Ohms. Like the Elite Stereo Amplifier, the Elite Mono has a usefully small footprint and has both RCA and AMPBUS inputs and 5-way binding posts. The Elite Mono is powerful enough to comfortably drive most loudspeakers on the market.
| Specifications |
|
| |
|
|
| |
Frequency Response- |
0.2 Hz – 80 kHz (+/- 3 dB) |
| |
|
|
| |
Total Harmonic Distortion- |
<0.005% at 100 W, 1 kHz |
| |
|
|
| |
Signal To Noise Ratio- |
<-110 dB (20 Hz – 20 kHz) |
| |
|
|
| |
Input Sensitivity- |
RCA: 775 mV |
| |
|
AMPBUS: 2.0 V |
| |
|
|
| |
Input Impedance- |
RCA: 33k Ohms |
| |
|
AMPBUS: 10k Ohms |
| |
|
|
| Retail Price: $2199.00 Per Pair |
|
Quad’s entry in the affordably priced, solid state integrated amplifier world is a sure winner. The Elite INT offers 80 watts per channel of power and comes equipped with two RCA inputs plus tape loop and a preamp out jack.
| Specifications |
|
| |
|
|
| |
Line Input Gain- |
37 dB Maximum |
| |
|
|
| |
Input Sensitivity- |
300 mV, 775 mV |
| |
|
|
| |
Output Voltage- |
300 mV, 775 mV (3.3 volts maximum) |
| |
|
|
| |
Output Impedance- |
100 Ohms |
| |
|
|
| |
Tape Out Impedance- |
330 Ohms |
| |
|
|
| |
Frequency Response- |
20 Hz – 20 kHz (+/-0.3 dB) |
| |
|
|
| |
Total Harmonic Distortion- |
<0.005% (at 1 kHz), <0.05% ( 20 Hz – 20 kHz) |
| |
|
|
| |
Signal-To-Noise Ratio- |
105 dB |
| |
|
|
| Retail Price: $1899.00 |
|
The Elite QSP is the successor to the legendary Quad 909 solid state power amplifier. The QSP improves upon the performance of the 909 with upgraded parts throughout. It offers 140 watts per channel of power using Quad’s patented Current Dumping Technology.
The QSP is one of the true values in high performance audio today.
| Specifications |
|
| |
|
|
| |
Signal Gain- |
33 dB |
| |
|
|
| |
Frequency Response- |
DC – 29 kHz (+/-1 dB) |
| |
|
|
| |
Total Harmonic Distortion- |
<0.004% at 100 W, 1 kHz |
| |
|
|
| |
Signal-To-Noise Ratio- |
>108 dB (20 Hz – 20 kHz), Ref. 140 W |
| |
|
|
| |
Damping Factor- |
230 |
| |
|
|
| |
Input Sensitivity |
|
| |
RCA- |
760 mV (for max output) |
| |
AMPBUS- |
2.0 V (for max output) |
| |
|
|
| |
Input Impedance |
|
| |
RCA- |
15 kOhms |
| |
AMPBUS- |
10 kOhms |
| |
|
|
| Retail Price: $1899.00 |
|
Boasting a whopping output of 260 watts of Quad’s Current Dumping Technology power into eight Ohms, the Elite QMP mono amplifiers are designed to drive the most demanding of loudspeaker loads.
| Specifications |
|
| |
|
|
| |
Signal Gain- |
33 dB |
| |
|
|
| |
Frequency Response- |
10 Hz – 50 kHz (+/-1dB) |
| |
|
|
| |
Total Harmonic Distortion- |
<0.005% at 100 W, 1kHz |
| |
|
|
| |
Signal-To-Noise Ratio- |
>105 dB (20 Hz – 20 kHz) |
| |
|
|
| |
Input Sensitivity |
|
| |
RCA- |
845 mV (for max output) |
| |
AMPBUS- |
2.0 V (for max output) |
| |
|
|
| |
Input Impedance |
|
| |
RCA- |
15 kOhms |
| |
AMPBUS- |
10 kOhms |
| |
|
|
| Retail Price: Coming Soon |
|
|